FAQ: Suzuki: GSX-R1000 (2001-2004)

  1. I’ve ordered and installed your clutch cushion mod for the 01-04 GSX-R1000. Would it defeat the purpose if I put the cushion in but left the stock springs in? With all 5 of the HD springs in the clutch lever it is very difficult to pull in, especially in traffic. Im not that big of a guy, at only 130lbs fully suited.
  2. I run a GSX-R1000 K3 with one of your clutch cushion kits. My question is, can the cushion kit handle a 40 dry shot of nitrous?
  3. What is the clutch stack height for an 01-04 GSX-R1000 when I remove a plate to make 8 steels and 8 fibers? I installed a clutch cushion for the back dated clutch on my 06 and have some OEM thick, thin steels, and fibers.
  4. I have installed the Ultra Clutch Mod, and at first it seemed like the clutch was engaging at the half way point of clutch lever, but after a couple of hard launches it seems to be engaging more towards the almost full out. How do I set the clutch at the adjuster and know its right?
  5. I have a 2006 GSX-R1000 and it has the 04 clutch (5 springs) with the stiff blue springs in it. Can I purchase the yellow 05/06 springs and put them in to make the clutch lever softer, because the blue ones are very stiff. Just want to know if it fits before I order them.
  6. What are the expected gains going from stock everything to a Brock’s Full Exhaust and PCV with Map in a GSX-R1000? I know there are a few more factors involved in this equation but I would like rough estimate. Thanks
  7. Do you have a gear ratio calculator?
  8. Why has my FI light started coming on when the bike is decelerating? I cut the wires at the pressure switch for the clutch.
  9. I installed your ultra clutch mod and yellow springs. Now, when I am on the line can I just dump it (does it drag or slip by itself and then bite) or do I still have to drag it? Is there more than one way of setting the clutch? I saw something about washers behind the springs? I am running 14-46 gearing and trying to keep the front end down through the end of first. I have a GSX-R1000 that’s lowered and strapped with weights.
  10. Does the oil cooler removal kit work for the GSX-R1000?
  11. How much power can the Clutch Cushion kit hold for the GSXR1000 and Hayabusa? I have a lock up and i’m having problems.
  12. Can you send me a map with the secondary throttle plates removed for a GSX-R1000? Also does Pair valve sucker mod in place mean that the Pair valve has been removed?
  13. Does the ECU have learning capabilities?
  14. I have a 02 GSXR 1000 with cams, ported head, exhaust and your modified ECU. Does the ECU have learning capabilities? My bike doesn’t have an O2 sensor, but I have been told I don’t need to use my power commander, my computer will tune it self.